Our Products

Hardened Bush for Bearing and Wear Interfaces

The Hardened Bush is a cylindrical bearing element supplied for applications requiring surface hardness and wear resistance. It is used where sliding contact or rotational interfaces demand a hardened bearing surface to extend component life. OEM assembly and maintenance teams use this component to control wear and maintain alignment.

Material and Hardening Notes

Production emphasizes surface hardening and dimensional control to ensure interference fit and bearing clearance. Typical hardening processes are selected based on load and wear expectations. Dimensional inspection validates bore and outer diameter conformity to assembly requirements.

Procurement and Supply Terms

Available for bulk sourcing and scheduled supply. Production planning aligns lead time with batch size and process route. Protective packaging is configured to prevent surface damage during transit.

Coupling Nut for Threaded Assemblies

The Coupling Nut is a threaded fastening element used to join or secure mating components in assemblies. It is selected where a secure threaded connection is required, often in combination with studs, fittings, or special mating hardware. Procurement teams specify coupling nuts by thread, length, and head style.

Manufacturing and Fit

Production focuses on thread form accuracy, material choice, and head geometry to ensure reliable engagement and torque response. Dimensional inspection validates thread profile and length to ensure compliance with mating parts.

Supply and Commercial Notes

Available for bulk sourcing with repeat production options. Protective packaging and batch inspection reports support production and maintenance programs.

Swivel Elbow for Articulated Fluid Connections

The Swivel Elbow provides a rotating joint in fluid and hydraulic lines to enable articulation and reduce torsion transmission. It simplifies routing where mobility or angular misalignment is present. OEM assembly planners and maintenance teams choose swivel elbows to reduce stress on hoses and fittings.

Design and Performance

Design considerations include swivel bearing fit, sealing interface, and torque resistance. Manufacturing controls ensure concentricity and sealing seat geometry to provide reliable rotational movement while maintaining fluid integrity.

Supply and Ordering

Available for bulk sourcing and scheduled supply. Delivery schedule depends on assembly complexity and finish selection. Protective packaging preserves sealing interfaces during transit.

Clevis Pin for Pivot and Linkage Connections

The Clevis Pin is a cylindrical fastener used to form removable pivot joints and linkages. It is commonly employed in mechanical linkages, clevis assemblies, and hinged connections where secure retention and easy disassembly are required. Procurement teams select clevis pins by diameter, length, and retention method.

Manufacture and Fit

Production emphasizes dimensional straightness, shoulder geometry, and finish to ensure smooth pivoting and consistent retention. Inspection validates overall length, diameter, and surface condition to ensure compatibility with mating clevis components.

Supply and Ordering

Available for bulk sourcing and scheduled production runs. Protective packaging secures pins to avoid surface damage during transit. Buyers should specify retention style and any coating requirements when ordering.

Forged Banjo Bolt for Hydraulic Fluid Lines

Process, Tolerance, and Interface Fit

This forged banjo bolt is intended for hydraulic line connections where a hollow bolt body and secure sealing are required. Forging provides improved grain flow and fatigue resistance compared with machined blanks. The design maintains an internal bore for fluid passage and a flange interface for sealing against mating ports.

Procurement Terms and Production Support

Production supports prototype to volume orders with dimensional inspection and material verification. Protective packing and consolidated shipments are provided for larger orders.

Bulkhead Elbow Connector for Panel-Mounted Fluid Lines

Process, Tolerance, and Interface Fit

The bulkhead elbow provides a sealed 90° fluid passage through a panel or enclosure. It is designed for panel mounting with a threaded flange or nut on the rear face. Key selection items include sealing face geometry, thread standard, and elbow bore size to maintain required flow performance without leakage.

Procurement & Supply Terms

Volume production includes dimensional inspection and sealing verification. Packing is optimized to protect flanged faces and finished threads for transit.

Bulkhead Straight Coupling for Panel Through-Fittings

Dimensional Precision and Material Specs

This bulkhead straight coupling provides a straight-through connection across panels or bulkheads. It is designed for sealed mounting with a rear retention nut or flange. Selection focuses on thread standard, coupling length, and sealing face to maintain fluid integrity across the panel interface.

Procurement & Production Support

Production supports prototype and volume orders with inspection reporting and protective packaging for transit.

Equal Tee Connector for Fluid Distribution Systems

Process, Tolerance, and Interface Fit

The equal tee connector provides a three-way junction with equivalent bore sizes for manifold and distribution applications. It is suitable for hydraulic, lubrication, and pneumatic assemblies where balanced flow and predictable pressure drop are required. Selection focuses on bore diameter, thread standard, and material to match system media and pressure class.

Procurement and Volume Support

Production covers prototype and production runs with dimensional inspection and supply planning support.

Threaded Grub Screw for Secure Fastening Applications

Dimensional Precision and Material Specs

The grub screw is a headless set screw intended to lock components on shafts or within assemblies. It provides localized clamping without projecting heads. Selection focuses on thread standard, material grade, and tip style to suit the mating component and prevent fretting or loosening in service.

Procurement and Volume Supply

Bulk production and packaging options are available. Inspection and material documentation support procurement acceptance criteria.

Non Standard Fastners for Custom Assemblies

Non Standard Fastners covers specially configured fasteners produced to non-catalog dimensions or unique functional profiles. These fasteners are specified when off-the-shelf parts do not meet assembly geometry, retention, or interface requirements. Procurement teams use this SKU type for build-to-print and custom integration projects.

Material and Dimensional Considerations

Selection focuses on the mechanical role of the fastener, including thread form, shank profile, and head geometry. Production emphasizes dimensional control, thread quality, and fit for mating components. Surface finish and coating choices depend on corrosion and assembly conditions.

Procurement & Production Support

Custom production runs support prototype-to-production transitions. Commercial volume procurement is supported for recurring programs. Buyers should supply drawings and targeted volume bands to align production planning and inspection sampling.

Parallel Male Stud Coupling (PMSC) for Fluid Connections

The Parallel Male Stud Coupling (PMSC) is a connection component designed for inline hydraulic and fluid system joins. It provides a parallel-stud interface to engage mating coupling components and maintain fluid integrity under operating pressure. OEM integration and maintenance teams use PMSC parts to standardize connections and simplify assembly.

Interface and Fit Considerations

Production emphasizes stud concentricity, thread engagement, and seating geometry to ensure leak-free performance. Material choice and finish are selected based on fluid compatibility and environmental exposure. Dimensional inspection confirms stud parallelism and thread acceptance.

Procurement and Supply

Available for bulk sourcing with scheduled production. Volume procurement and repeat-supply arrangements are supported. Packaging protects interfacing faces and threads during shipment.

Ermetto Fittings for Compression Tube Connections

Ermetto Fittings are compression-style connectors used for hydraulic and instrumentation tubing. They provide a reliable seal when assembled with the correct ferrule and nut combination. These fittings are selected for compact system routing and repeatable assembly performance.

Design and Compatibility

Production focuses on thread fit, sealing surface quality, and dimensional conformity to ensure reliable compression sealing. Material and finish choices reflect fluid compatibility and exposure conditions. Dimensional inspection verifies thread class and sealing face geometry.

Supply and Procurement

Available for bulk sourcing and scheduled supply. Buyers are advised to provide tubing OD, thread class, and application pressure class to confirm fit and compatibility before ordering.

Threaded Studs for Mechanical Fastening and Assembly

Process, Tolerance, and Interface Fit

Threaded studs provide a double-ended threaded fastening solution for flanged joints and assemblies requiring bolted connections. They offer consistent clamping and can be specified with various thread classes, lengths, and material grades to match assembly torque and corrosion requirements.

Procurement and Production Support

Production accommodates prototype and production volumes with inspection and material traceability. Packaging safeguards threads and prevents damage during transit.

Precision Machined Components for OEM Assemblies

Precision machined components supplier tailored for OEM assembly lines.

Parts are produced to tight dimensional tolerances. Each part is engineered for consistent fit and repeatability. CNC turning and milling form the primary process route for common geometries.

Material selection follows drawing requirements and assembly compatibility. Finishes and coatings are specified to meet mating, wear, and corrosion constraints.

Production supports prototype runs through repeat volume batches. Available for bulk sourcing and build-to-print production. Lead time is determined by batch size and machining route.

Dimensional inspection and batch traceability support incoming inspection. Protective packing is configured to preserve critical features during transit. Technical drawing review is available to align tolerances and process choice.

JIC Fittings, or JIC Hydraulic Fittings, provide a standardized 37-degree flare seat used to create a metal-to-metal seal in high-pressure hydraulic connections. Elpar Industries manufactures and supplies JIC Fittings for hydraulic manifolds, hose assemblies, and instrumentation, serving OEM buyers and maintenance planners across India and export markets.

JIC Fittings for Metal-to-Metal Hydraulic Sealing

A JIC fitting differs from an NPT or BSP fitting in that it seals through a 37-degree flare seat rather than tapered thread engagement, giving buyers a defined interchangeable connection type for hydraulic assemblies. Elpar manufactures JIC Fittings to flare seat geometry and thread class specifications confirmed at the time of order.

Bulk Supply for Hydraulic & Industrial Buyers

Elpar supports bulk supply of JIC Fittings for OEM buyers, industrial equipment manufacturers, and maintenance planning teams. Our team confirms thread size and material requirements with buyers ahead of order placement to ensure correct fit with existing assemblies.

Hydraulic Ferrule, also referred to as a Hydraulic Ferrule Fitting, is a compression-style sleeve used to create a secure termination between tubing or hose and fitting bodies. Elpar Industries manufactures and supplies Hydraulic Ferrules for hydraulic manifolds, hose assemblies, and tube fittings, serving OEM buyers and maintenance teams across mobile and stationary equipment sectors.

Hydraulic Ferrule Fittings for Consistent Sealing Under Pressure

A Hydraulic Ferrule achieves its seal through dimensional accuracy against a specified tubing OD, rather than thread engagement alone, making correct sizing critical to leak-free performance. Elpar manufactures Hydraulic Ferrules with attention to wall cross-section and chamfer geometry, confirmed against buyer-supplied tubing and fitting details.

Bulk Supply for OEM & Maintenance Programs

Elpar supports bulk supply of Hydraulic Ferrules for OEM system assembly, field replacement programs, and project-level hose assembly requirements. Our team confirms tubing OD and fitting model with buyers ahead of order placement to ensure correct ferrule selection.

BSP Male Adapter is a precision-threaded hydraulic fitting designed to provide a standardized British Standard Pipe interface for assembly integration. Elpar Industries manufactures and supplies BSP Male Adapters for hydraulic manifolds, piping runs, and instrument connections, serving OEM buyers and industrial procurement teams.

BSP Male Adapter for BSPP & BSPT Thread Compatibility

BSP threads exist in two distinct forms, BSPP (parallel) and BSPT (tapered), and confirming which applies to a given port is essential before ordering. Elpar manufactures BSP Male Adapters to precise thread form and pitch accuracy, ensuring proper seating when paired with compatible BSPP or BSPT components.

Bulk Supply for Hydraulic & Industrial Buyers

Elpar supports bulk supply of BSP Male Adapters for OEM buyers, industrial equipment manufacturers, and maintenance planning teams. Our team confirms thread spec and material preference with buyers ahead of order placement to ensure leak-free installation.

CNC Machined Components are precision parts produced to drawing with controlled tolerances and surface finishes for OEM integration. Elpar Industries manufactures and supplies CNC Machined Components for valve bodies, housings, and fastening interfaces, serving OEM procurement teams and assembly engineers across industrial, automotive, and hydraulic sectors.

Precision CNC Machined Components for OEM Assemblies

Choosing a CNC Machined Components manufacturer with build-to-print capability matters when tolerance holding and material grade directly affect assembly performance. Elpar covers prototype runs through production batches, supporting materials from common steels to corrosion-resistant alloys.

Bulk Supply for OEM & Industrial Buyers

As a CNC Machined Components supplier, Elpar supports drawing-based production, dimensional inspection reporting, and process control checkpoints for OEM procurement teams and industrial buyers. Our team assists with CAD review and tolerance alignment for ongoing production programs.